Genelec 8020 Studio Monitor Dark Grey – Pair

Description

Genelec 8020D Studio Monitor (Producer Finish) Dark Grey – Pair

Paket 1 Pasang – 2 unit

Spesifikasi
Cut-Off Frequency
Lower: 56 Hz at -6 dB
Upper: 25 kHz at -6 dB

Frequency Response
62 Hz to 20 kHz (2.5 dB)
SPL 100 dB SPL maximum (short-term sine-wave acoustic output on axis in half-space, averaged from 100 Hz to 3 kHz at 3.3′ / 1 m)
93 dB SPL maximum (long-term RMS acoustic output in the same conditions with IEC weighted noise (limited by driver protection circuit) at 3.3′ / 1 m)
Peak Output Capacity 107 db maximum peak acoustic output (per pair in listening room with music material at 3.3′ / 1 m)

Self-Generated Noise Level
5 dB (in free field at 3.3′ / 1 m on axis (A-weighted))

Harmonic Distortion
< 3% (at 85 dB SPL at 3.3′ / 1 m on axis, 50 to 200 Hz)
< 0.5% (at 85 dB SPL at 3.3′ / 1 m on axis, higher than 200 Hz)

Drivers
Bass: 4″ / 105 mm cone
Treble: ” / 19 mm metal dome
Both drivers are magnetically shielded

Amplifier
Bass Amplifier Short-Term Output Power: 50 W
Treble Amplifier Short-Term Output Power: 50 W
Long-term output power is limited by driver protection circuitry

THD
0.05% at nominal output
Crossover Frequency Bass/Treble: 3 kHz

Digital Controls
GLM Software Frequency Response Adjustment
Parametric Notch Filters: 16x
Shelving Filters: 2 x LF and 2 x HF
System Room Response Calibration: Genelec GLM AutoCal, GLM manual, standalone

Mains Voltage
100 to 240 VAC 50/60 Hz

Power Consumption
Idle: 3 W
Standby: < 0.5 W
Full Output: 60 W

Analog Input
XLR female, balanced (pin 1 ground, pin 2 positive, pin 3 negative)

Input Level
-6 dBu at volume control max (for 100 dB SPL at 3.3′ / 1 m)
Input Impedance 10 kOhms

Sensitivity
-12 dB (constantly variable, control range relative to maximum output)

Controls
Treble Tilt Control (operating range): 0 to -2 dB at 15 kHz
Desktop 200-Hz Control: -4 dB at 200 Hz
Bass Roll-Off Control: 0 to -4 dB at 65 Hz